$0.00
$265.00
Simple Tap Setup & Keg Bond
Fresh beer for months… Yes this is the simplest way to keep draft beverages fresh for months. You don’t need to do any DIY, just a CO2 soda stream cylinder from Coles/Woolies and then a way to keep the keg cold.
Key Benefits
– Flow control tap gets you the perfect pour
– No beer line makes cleaning a breeze
What’s included?
- -A type coupler
- -Intertap FC (Stainless Steel Flow Control)
- -Low Profile Elbow Bend for 50L Coupler Gas
- -KingLok Male x Tap Shank Adaptor
- -KingLok Female x 5/8 Female
- -Premium Ball Lock Disconnect (Grey/Gas)
- -Gas line EVABarrier 4mm(5/32) x 8mm(5/16) Double Wall
- -Ball Lock Post with 5/8″ BSP Thread
- -Liquid Ball Lock Post with 5/8″ BSP Thread
- -Regulator TBC – MK4 regulator
- -Soda Stream Cylinder Adapter (with adjustment pin)
- -StellarClean PBW (to clean your beer lines)
How it works?
1. Hit the “Add to Cart” button below..
2. Open the “Kegs” page, find a brew you’d like and add to cart
3. Go to check out – choose if you’d like your keg delivered or if you will collect in person at the brewery. Tapping gear will be posted separately to the keg.
4. Check out, tap and enjoy
5. Next keg purchase just exchange your empty for full, no need to pay for the keg bond again.
Please note: The refundable keg bond and Soda Stream gas cylinder is not included, if needed you can grab a gas cylinder from Coles or Woolies.
Please let us know if you have any questions – hello@kegswappa.com.au
$199.00
Simple Gun Setup
The simple set up is like the name suggests the simplest way to get set up as you don’t need to do any DIY, just need a fridge big enough to put the keg and coupler – which stands 69cms tall and 24cms wide.
What’s included?
- -Refundable keg bond of $99
- -A type coupler
- -Low Profile Elbow Bend for 50L Coupler Gas
- -Ball Lock Post with 5/8″ BSP Thread
- -Liquid Ball Lock Post with 5/8″ BSP Thread
- -Regulator TBC – MK4 regulator
- -Soda Stream Cylinder Adapter (with adjustment pin)
- -Nylon Reinforced Black Pluto Dispensing Gun (duotight)
- -StellarClean PBW (to clean your beer lines)
How it works?
1. Hit the “Add to Cart” button below..
2. Open the “Kegs” page, find a brew you’d like and add to cart
3. Go to check out – choose if you’d like your keg delivered or if you will collect in person at the brewery. Tapping gear will be posted separately to the keg.
4. Check out, tap and enjoy
5. Next keg purchase just exchange your empty for full, no need to pay for the keg bond again.
Please note: Soda Stream gas is not included, if needed you can grab a gas cylinder from Coles or Woolies. Please also add to your cart the keg bond for the number of kegs you need.
Please let us know if you have any questions – hello@kegswappa.com.au
$265.00
Party Tap Setup
An easy way to dispense a keg that doesn’t need a CO2 cylinder although you will need a way to keep the keg, coupler and tap cold, e.g. an esky or bucket of ice.
What’s Included
– Keg Bond
– Pump
– Coupler
– Tap
What you will need
– An esky or bin with ice (warm keg, coupler, tap = foamy pours so keep super cold)
– Cups / Glasses
Please Note: Oxygen spoils beer so after tapping you will need to finish the keg within 12hrs. If you want the option to drink the keg over several months check out the gas options.
Please let us know if you have any questions – hello@kegswappa.com.au
$188.00
Party Pump & Bond
This is for sure the cheapest and arguably finest, option! You get a basic party pump and a plastic tap to dispense your brews with. The draw back of this set up is that oxygen rather than CO2 is used to push out the brew and oxygen will spoil the beverage within 12 hrs rather than CO2 which will give you a few months of freshness. If you plan to finish the keg (responsibly of course) in one sitting, ideally within 12ish hours, then this is still a low fuss and worthy option to consider.
How do you keep kegs cold?
Just put the keg in a bucket of ice and pump the beer out at your leisure.
How it works?
1. Hit the “Add to Cart” button below..
2. Open the “Kegs” page, find a brew you’d like and add to cart
3. Go to check out – choose if you’d like your keg delivered or if you will collect in person at the brewery. Tapping gear will be posted separately to the keg or dropped at breweries when possible.
4. Check out, tap and enjoy
5. Let us know when you have finished with the keg and it’s been dropped back at the brewery, we will then refund the $99 keg bond.
Features
– Easy to use
– No gas cylinder required
– No electricity required
Warning: Because Oxygen spoils beer after tapping the beer needs to be drunk within one sitting, ideally within 12hrs. If you want the kegs to stay fresh for months check out the simple tap set up.
Please let us know if you have any questions – hello@kegswappa.com.au